RAD 16E1 1百兆以太网光端机 OP-134/PSR/B/A/100M

价格	¥19500.00	¥18500.00	¥17000.00
起订量	1-9台	10-99台	≥100台
可售	1000台

你可能还喜欢

产品参数
图文介绍
企业简介
企业地址

产品参数

品牌

RAD

型号

OP-134/PSR/B/A/

接口类型

传输距离

20km

信号阻抗

120欧姆

带宽

10/100mbps

电源

220V,-48V

功耗

25w

类型

PDH光端机

图文介绍

OP-134/UBR/A Fiber multiplexer for 16 E1 and Ethernet, IEC-169/13, alarm connector

OP-134/U Fiber multiplexer for 16 E1 and Ethernet, unbalanced E1 interface

OP-134/PSR/U/100M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, unbalanced E1 interface, 100 Mbps Ethernet throughput

OP-134/DCR/B/100M Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, balanced E1 interface, 100 Mbps Ethernet throughput

OP-134/B Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface

OP-134OBB/PSR/B/A/8M/SFP-1 Fiber multiplexer for 16 E1 and Ethernet for ITM, redundant power supply, balanced E1 interface, alarm connector, 8 Mbps Ethernet throughput, Fast Ethernet/STM 1, 1310 nm, multimode, LED, 2 km (1.2 mi)

OP-134OBB/PSR/B/A/8M/SFP-10A Fiber multiplexer for 16 E1 and Ethernet for ITM, redundant power supply, balanced E1 interface, alarm connector, 8 Mbps Ethernet throughput, Fast Ethernet/STM 1, Tx - 1310 nm, Rx - 1550 nm, single mode (single fiber), laser (WDM) , 20 km (12.4 mi)

OP-134OBB/PSR/B/A/8M/SFP-10B Fiber multiplexer for 16 E1 and Ethernet for ITM, redundant power supply, balanced E1 interface, alarm connector, 8 Mbps Ethernet throughput, Fast Ethernet/STM 1, Tx - 1550 nm, Rx - 1310 nm, single mode (single fiber), laser (WDM) , 20 km (12.4 mi)

OP-134OBB/PSR/B/A/8M/SFP-2 Fiber multiplexer for 16 E1 and Ethernet for ITM, redundant power supply, balanced E1 interface, alarm connector, 8 Mbps Ethernet throughput, Fast Ethernet/STM 1, 1310 nm, single mode, laser, 15 km (9.3 mi)

OP-134/DCR/U Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, unbalanced E1 interface

OP-134/B/V35 Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, V.35

OP-134/B/V35/8M Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, V.35, 8 Mbps Ethernet throughput

OP-134/PSR/U Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, unbalanced E1 interface

OP-134/PSR/B/100M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, 100 Mbps Ethernet throughput

OP-134/PSR/U/A/8M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, unbalanced E1 interface, alarm connector, 8 Mbps Ethernet throughput

OP-134/PSR/B Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface

OP-134/B/A/100M Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, alarm connector, 100 Mbps Ethernet throughput

OP-134/PSR/B/A Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, alarm connector

OP-134/PSR/UBR/A/100M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, IEC-169/13, alarm connector, 100 Mbps Ethernet throughput

OP-134-PS Power supply module for OP-134

OP-134/B/100M Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, 100 Mbps Ethernet throughput

OP-134PD/PSR/B/A/8M/SFP-2 Fiber multiplexer for 16 E1 and Ethernet for Pandacom, redundant power supply, balanced E1 interface, alarm connector, 8 Mbps Ethernet throughput, Fast Ethernet/STM 1, 1310 nm, single mode, laser, 15 km (9.3 mi)

OP-134/DCR/B/A/100M Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, balanced E1 interface, alarm connector, 100 Mbps Ethernet throughput

OP-134/DCR/B/A/V35/8M Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, balanced E1 interface, alarm connector, V.35, 8 Mbps Ethernet throughput

OP-134/PSR/B/A/V35/8M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, alarm connector, V.35, 8 Mbps Ethernet throughput

OP-134/PSR/U/A Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, unbalanced E1 interface, alarm connector

OP-134/DCR/U/100M Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, unbalanced E1 interface, 100 Mbps Ethernet throughput

OP-134/PSR/B/A/100M/H Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, alarm connector, 100 Mbps Ethernet throughput, hardened enclosure

OP-134/U/A Fiber multiplexer for 16 E1 and Ethernet, unbalanced E1 interface, alarm connector

OP-134/PSR/B/8M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, 8 Mbps Ethernet throughput

OP-134/U/A/8M Fiber multiplexer for 16 E1 and Ethernet, unbalanced E1 interface, alarm connector, 8 Mbps Ethernet throughput

OP-134/U/8M Fiber multiplexer for 16 E1 and Ethernet, unbalanced E1 interface, 8 Mbps Ethernet throughput

OP-134/U/100M Fiber multiplexer for 16 E1 and Ethernet, unbalanced E1 interface, 100 Mbps Ethernet throughput

OP-134/PSR/U/A/8M/V35 Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, unbalanced E1 interface, alarm connector, 8 Mbps Ethernet throughput, V.35

OP-134/B/A/V35 Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, alarm connector, V.35

OP-134/DCR/U/A/V35/8M Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, unbalanced E1 interface, alarm connector, V.35, 8 Mbps Ethernet throughput

OP-134/B/8M Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, 8 Mbps Ethernet throughput

OP-134/PSR/B/A/100M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, alarm connector, 100 Mbps Ethernet throughput

OP-134/PSR/U/A/100M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, unbalanced E1 interface, alarm connector, 100 Mbps Ethernet throughput

OP-134-LIC-ETH/100M Activation key for OP-134 ETH port throughput, 100 Mbps Ethernet throughput

OP-134-LIC-ETH/8M Activation key for OP-134 ETH port throughput, 8 Mbps Ethernet throughput

OP-134/DCR/U/A/8M Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, unbalanced E1 interface, alarm connector, 8 Mbps Ethernet throughput

OP-134/DCR/B Fiber multiplexer for 16 E1 and Ethernet, redundant DC power supply, balanced E1 interface

OP-134/B/A Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, alarm connector

OP-134/B/A/8M Fiber multiplexer for 16 E1 and Ethernet, balanced E1 interface, alarm connector, 8 Mbps Ethernet throughput

OP-134/PSR/B/A/8M Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, alarm connector, 8 Mbps Ethernet throughput

OP-134/DC/B/A/V35/8M Fiber multiplexer for 16 E1 and Ethernet, DC, balanced E1 interface, alarm connector, V.35, 8 Mbps Ethernet throughput

OP-134/PSR/B/A/V35 Fiber multiplexer for 16 E1 and Ethernet, redundant power supply, balanced E1 interface, alarm connector, V.35

OP-134/DC/U/A Fiber multiplexer for 16 E1 and Ethernet, DC, unbalanced E1 interface, alarm connector

Optimux-125, Optimux-134 E3或光纤复用器承载16E1/T1、以酞网或数据在单一34/25 Mbps线路上集成多达16条E1或T1信道、高速并可选配支持以酞网业务 10/100 BaseT以酞网同轴电缆(仅限于E 1 版本)或光缆(Optimux-34)上进行E3传输多模或单模光纤单光纤单模或WDM 符合ITU G.703、G.742、G.751、G.823、G.824、G.955、G.956、IEEE802.3 可选条线路提供自动备份可选冗余的宽泛的电源通过ASCII终端、Web终端或SNMP管理程序进行管理紧凑外型(1U高；非平衡接口的2U高机箱) Optimux-34和Optimux-25可以在长达110公里(69英里)的距离上提供简单而经济的多条E1或T1，以及数据和以酞网的连接方案。 Optimux-34支持多达16条E1信道，Optimux-25支持多达16条T1信道。可选配单独10/100 BaseT以酞网用户端口。以酞网所需的带宽可以由用户以8或6Mbps分级调整。配置选项如下：只限16条E1/T1 12条E1和以酞网业务的8.448 Mbps 12条T1和以酞网业务的6.176 Mbps 8条E1和以酞网业务的16.893 Mbps 8条T1和以酞网业务的12.352 Mbps 4条E1和以酞网业务的25.334 Mbps 4条T1和以酞网业务的18.528 Mbps 仅供以酞网的32 Mbps (Optimux-34) 仅供以酞网的25 Mbps (Optimux-25) Optimux-34 E1版本的主线路接口可以是标准的同轴E3接口或光纤接口。在Optimux-25版本中，只配有光纤接口。可提供下列光接口：用于在单模光纤上延伸传输距离 1310 nm及1550 nm激光用于在单模光纤上延伸传输距离 1310 nm及1550 nm远程产品可选单条光纤线路(WDM) 以酞网传输使用单一内置10/100 BaseT LAN端口。以酞网端口操作模式为全双工和半双工，并且支持自动谈判和透明VLAN传输。还支持IEEE 802.3x流量控制和反压。 Optimux-34和Optimux-25可提供模块化的冗余电源和线路以增强系统的可靠性。可选的线路可在主线路故障时，通过自动切换提供备份。 Optimux-34和Optimux-25设备独立地传送每个E1或T1通道。E1接口可以为75欧非平衡的或120欧平衡的。T1接口可以为100欧平衡的。 Optimux-34的E3接口时钟可以锁定至一个外接站时钟。为便于系统诊断，所有设备都具有发光二级管状态显示、AIS告警发生、识别及在线路发生故障时干接点关闭功能。此外，还可通过监控端口使用ASCII终端、Telnet主机或Web终端，或SNMP管理站经以酞网端口或专门设计的管理端口(以酞网或RS-232)进行设置、控制和诊断。 SNMP管理程序提供下列服务：在Windows环境运行RADview 在HP OpenView UNIX平台上运行RADview Optimux-34为紧凑的高1U或2U设备， Optimux-25为1U高设备。

企业简介

上海凯润计算机网络系统有限公司

联系信息：

张超

联系电话：

18221832807

固定电话：

021-60947415

所在区域：

上海市市辖区中山北路1759号浦发广场D座1511-1512室

进入店铺

企业法人：

郑海菊

企业类型：

有限责任公司（自然人投资或控股）

成立日期：

2000-11-22

经营状态：

存续

工商注册号：

310120001295627

社会统一信用代码：

91310120703068829M

组织机构代码：

703068829

注册资金：

2100万人民币

经营范围：

计算机领域内的技术开发、技术转让、技术服务、技术咨询，软件开发，网络工程施工，计算机及软件（除计算机信息系统安全专用产品）、办公设备、办公用品、包装材料、装饰材料、程控交换机、工艺礼品批发、零售。【企业经营涉及行政许可的，凭许可证件经营】

企业地址

店铺新品