asa塑木外墙挂板 杭州筠尚新材料有限公司出品

1、色彩丰富、可塑性强

这类产品的色系非常丰富，因此可供用户挑选的余地很多，同时还能依据自己的喜好来定制所需的色彩，充分的体现出个性化风格，尤其是一些年轻人，非常喜欢这种装修方式。

2、环保性高、防火性强

从目前大众选用的质料来看，大多更加注重产品的环保性能，而木塑板不含苯物质，甲醛含量为0，低于于EO级标准，为欧洲定级环保标准，可循环利用，大大节约了木材使用量，适合可持续发展的国策，另外它的防火性很强，遇火自熄，不产生任何有毒气体。

3、安装简单、吸音效果佳

对于这类产品的安装，无需过于复杂的工艺，有效的节约了操作时间及费用，同时它的可加工性很好，比方说订、刨、锯、钻等都能轻易实现，另外它的吸音效果佳，节能性能好.

木塑墙板安装方法

在动工前，首先要检查产品的型号及尺寸，以及其表面是否存在损坏，其次准备相关工具进行安装，然后根据安装示意图，用电钻打孔，再将木塑龙骨安装在地面上，并用自攻螺钉固定，使其与木塑墙板的表面一致， 后在铺设开始和结束位置，用螺钉将木塑墙板和龙骨做个固定，将塑料卡扣用在其余木塑墙板和龙骨的交界处，检查是否牢固连接。

(5)筛余物聚氯乙烯树脂筛余物指标是通过不同孔径的标准
,在规定的时间内,通过机械振摆进行干,而获得的一定颗粒
范围的树脂质量分数,是聚氯乙烯树脂粒径大小及分布的简单表示
方法。大多数悬浮聚合聚氯乙烯树脂的粒径为30~150pm,可以
采用多个不同孔径的筛网对聚氯乙烯树脂进行筛分,得到不同筛目
下的质量分数,金日光等研究表明,分筛的粒径分布与颗粒矩轴粒
径分布相近,并且分筛出多量的粒径范围较接近于颗粒短轴粒径
分布集中的区域。国标中的指标有两个数值,即≤250m(60
目)筛孔和≥63pm(230目)筛孔的筛余物质量分数。

Asa plastic wood wall hanging board produced by hangzhou yunshang new materials co., LTD

1. Rich color and strong plasticity

The color department of this kind of product is very rich, because this can offer the leeway that the user chooses very much, still can customize the color that needs according to his be fond of at the same time, sufficient body gives individuation style, especially a few youths, like this kind to decorate means very much.

2, high environmental protection, fire prevention

From the point of the public to choose material, mostly pay more attention to the environmental performance of products, wood and plastic board does not contain benzene, formaldehyde content is 0, below in EO level standard, for the European environmental protection standard of grading, recycled, greatly save the wood usage, is suitable for the sustainable development of the national policy, and its fire retardancy is very strong, in self-extinguishing fire, do not produce any toxic gases.

3, simple installation, good sound-absorbing effect

For the installation of this kind of products, without too complicated technology, effectively saves the operation time and cost, at the same time it can be processed very well, such as set, planer, saw, drill can be easily achieved, in addition to its sound-absorbing effect is good, good energy-saving performance.

Installation method of wood-plastic wallboard

Before construction, the first thing to check the product's type and size, and whether its surface is damaged, then prepare related tools for installation, and then according to the installation diagram, use electric drill holes, then install wood plastic keel on the ground, and tapping screws, to make it consistent with the surface of the wood plastic wall plate, finally at the start and end position, laid with screw to fix a wood plastic wall plate and keel, use plastic buckles on the rest of the wood plastic wall plate and keel, check whether the strong connection.

(5) screen residue polyvinyl chloride resin screen residue index is the standard through different aperture

, in a specified period of time, through the mechanical pendulum to dry, and obtain a certain number of particles

The resin mass fraction in the range is a simple representation of the size and distribution of polyvinyl chloride resin particles

Methods.Most of the suspended polyvinyl chloride resin particle size of 30~150pm, can

Polyvinyl chloride (PVC) resin was screened with different mesh sizes and different mesh sizes were obtained

The results show that the particle size distribution of the sieve and the particle moment axial granule

The diameter distribution is similar, and the particle size range with the largest amount of sieving is close to the particle diameter of short axis

The most concentrated area.The indicators in the national standard have two values, namely 250m(60)

Mesh) and 63pm(230 mesh) mesh sieve residue mass fraction.