欢迎来到采通通

上海荣计达仪器科技有限公司

13761118616
店铺首页 企业档案

荣计达STT-910反光膜附着性测定器

价格
¥2600.00
起订量 1台
可售 100台
  • 产品参数
  • 图文介绍
  • 企业简介
  • 企业地址
产品参数
加工定制
是
品牌
荣计达
型号
STT-910
外形尺寸
可定制
重量
定制
产品用途
反光膜附着性测定器
图文介绍

反光膜附着性测定器概述:

STT-910 反光膜附着性测定装置是上海荣计达实验仪器有限公司专为生产、质量监督、工程施工和监理等单位测量反光膜附着性而设计和生产的。具有结构合理、操作简单、适用性广、测量精度高、测量安全及可靠性好等特点。

Overview of reflective film adhesion tester

STT-910 reflective film adhesion measuring device is designed and produced by Shanghai Rongjida Experimental Instrument Co., Ltd. for production, quality supervision, engineering construction and supervision, etc. It has the characteristics of reasonable structure, simple operation, wide applicability, high measurement accuracy, good measurement safety and reliability

反光膜附着性测定器技术参数:

钢锤质量:800 ±3克

钢锤落差:0.2~0.3 米

Technical parameters of reflective film adhesion tester

Steel hammer mass: 800 ± 3 g

Steel hammer drop: 0.2 ~ 0.3 meters

 

反光膜附着性测定器结构组成:

主要由钢锤、钢锤挂钩、反光膜粘贴板、底座和撑杆等组成

Structural composition of reflective film adhesion tester

It is mainly composed of steel hammer, steel hammer hook, reflective film paste board, base and brace, etc.

 

反光膜附着性测定器操作步骤:

按20毫米×250毫米尺寸裁剪反光膜试样,将长约100毫米的一端贴在反光膜粘贴板的中间部位,另一端卷成环状,为保险起见可用订书机加强,将反光膜粘贴板贴膜面朝下置于支架槽内,再用钢锤挂钩将钢锤悬挂在反光膜环行端。待稳定后用秒表测量钢锤悬挂的时间及反光膜的粘贴状况,记录测量时间数据,依据标准评判反光膜的附着性。

Operation steps of reflective film adhesion tester

Cut the reflective film sample according to the size of 20 mm × 250 mm, and stick one end of about 100 mm to the middle part of the reflective film paste board, and roll the other end into a ring. For security, you can use a stapler to strengthen the reflective film The plate film is placed face down in the bracket groove, and the steel hammer is hung on the reflective film circle end with a steel hammer hook. After stabilization, use a stopwatch to measure the hanging time of the steel hammer and the sticking status of the reflective film, record the measurement time data, and judge the adhesion of the reflective film according to standards.

 

反光膜附着性测定器注意事项:

★为了保障测量结果的准确度,在测量前应尽量做好反光膜试样的准备工作;贴好反光膜;

★为了确保测量结果可靠,钢锤的垂挂应均衡平稳;

★本仪器知识产权归本公司所有,严禁仿制;否则,本公司将终止履行相关维修义务,并保留法律追究的权利。

★对本使用说明书如有疑惑欢迎赐教。

Notes on reflective film adhesion tester

★ In order to ensure the accuracy of the measurement results, the preparation of the reflective film sample should be done as far as possible before the measurement; the reflective film should be affixed;

★ To ensure reliable measurement results, the hanging of the steel hammer should be balanced and stable;

★ The intellectual property rights of this instrument belong to the company, and imitation is strictly prohibited; otherwise, the company will terminate the performance of related maintenance obligations and reserve the right to pursue legal investigations.

★ If you have any doubt about this manual, please enlighten me.

 

反光膜附着性测定器贮存条件:

测定器及其附件应存放在干燥、清洁、无振动、无易燃、易腐蚀物品的环境条件下。

Storage conditions of reflective film adhesion tester

The analyzer and its accessories should be stored in a dry, clean, vibration-free, flammable, and corrosive environment.

企业简介
联系信息:
王林
联系电话:
13761118616
固定电话:
021-61997300
所在区域:
上海市市辖区浦江镇沈杜公路3259号
进入店铺
企业法人:
王秀锋
企业类型:
其他有限责任公司
成立日期:
2015-09-02
经营状态:
存续
工商注册号:
310120002904251
社会统一信用代码:
91310120350770996K
组织机构代码:
350770996
注册资金:
200.000000万人民币
经营范围:
从事仪器科技领域内的技术开发、技术咨询、技术服务、技术转让,仪器仪表制造、加工(以上限分支机构经营),仪器仪表、实验室设备、五金交电、机电设备、机械设备、模具的批发、零售,机械设备(除特种设备)、实验室设备、机电设备的安装、维修。 【依法须经批准的项目,经相关部门批准后方可开展经营活动】
企业地址
  • 产品参数
  • 图文介绍
  • 企业简介
  • 企业地址
13761118616